Lifting Subs | Lifting Caps (Plugs) | Crossover Subs | Circulating Subs | Wear Subs
100% API Spec 7-1 & 5CT Compliant | AISI 4145H Mod & Non-Magnetic Metallurgy | -40°C Arctic Toughness & NACE MR0175 Sour Service | Fast-Track 35–45 Day Global Delivery
Engineered for seamless drill string transition, safe tubular hoisting, high-pressure fluid circulation, and wellbore casing protection, our comprehensive Drill String Subs and Lifting Tools Portfolio eliminates thread compatibility bottlenecks and rig-floor handling hazards
Manufactured from vacuum-degassed, fully heat-treated AISI 4145H Modified alloy steel (with optional Non-Magnetic / P550 grades for MWD/LWD proximity), our complete lineup—including Lifting Subs, Lifting Caps (Plugs), Crossover Subs, Circulating Subs, and Wear Subs—is CNC-machined to strict API Spec 7-1, API Spec 5CT, and API Spec 8C standards
Designed for 100% direct drop-in compatibility with international BHA components, drill pipes, drill collars, and casing strings, every sub undergoes -40°C Charpy V-Notch impact testing, cold-worked thread root rolling, and phosphating anti-galling treatment. Backed by full EN 10204 3.1 MTRs, UT/MT non-destructive testing, and a guaranteed 35–45 day fast-track delivery, we serve active drilling contractors and oilfield operators across Central Asia, the Middle East, North America, and worldwide basins.
Design & Function: Precision-machined with an upper 18° tapered or 90° square elevator shoulder and a lower API rotary shouldered pin connection
Rig-Floor Efficiency: Available in single-shoulder and dual-shoulder configurations with machined slip-recess profiles for rapid, safe BHA makeup and handling
Design & Function: Heavy-duty forged steel bail-type caps (available in both Pin and Box configurations with fixed or swivel lifting bails) that thread directly onto drill collars, subs, and downhole tools
Thread & Equipment Protection: Protects precision API connections from impact damage while allowing safe crane/winch hoisting during rig-floor pickup, laydown, and tubular transportation
Design & Function: Engineered to connect drill string and BHA components with dissimilar thread sizes, thread types, or outer diameters—available in Box x Pin, Pin x Pin, and Box x Box configurations
Stress-Relief Geometry: Features API standard stress-relief grooves (SRG) on pins and bore-back boxes to prevent cyclic bending fatigue failures in high-dogleg directional and horizontal wells
Design & Function: Equipped with an upper drill pipe/casing connection and a high-pressure side-entry port (such as Weco Figure 1502 / 602 hammer union or API line pipe threads) for direct connection to mud hoses or cementing lines
Well Control & Cementing: Allows immediate, safe mud circulation, well-kill operations, and cementing inside the drill string or casing without requiring kelly or top-drive makeup
Design & Function: Sacrificial sacrificial-thread subs installed directly below the top drive, kelly, or within the drill string to absorb repetitive makeup/breakout thread wear and casing-wall friction
Hardbanding & Sleeve Options: Available with non-damaging tungsten carbide hardbanding (e.g., ARNCO 100XT/300XT) or non-rotating composite/steel wear sleeves to protect expensive top-drive saver shafts and intermediate casing strings from keyseating
| Product Category | Connection Configurations | Material & Metallurgy Options | Applicable API Standards | Key Engineering Features |
Lifting Subs | Elevator Neck x API Pin (NC, REG, IF, FH) | AISI 4145H Mod (285–341 HBW) | API Spec 7-1 / Spec 8C | 18° Tapered or 90° Square Shoulder; 1.5x Load Tested |
Lifting Caps (Plugs) | Fixed / Swivel Bail x API Pin or Box | Forged Alloy Steel (4140 / 4145H) | API Spec 7-1 / Spec 8C | Full-Radius Forged Bail; Heavy-Duty Thread Protection |
Crossover Subs | Box x Pin, Pin x Pin, Box x Box (Rotary & Casing) | AISI 4145H Mod / Non-Magnetic (NMDC) | API Spec 7-1 / API 5CT | Stress-Relief Grooves (SRG), Bore-Back, Cold-Rolled Roots |
Circulating Subs | API Drill Pipe/Casing x Weco 1502 / LP Side Port | High-Strength AISI 4145H Mod | API Spec 7-1 / 5CT / 6A | Up to 15,000 PSI Working Pressure; Rapid Mud Circulation |
Wear Subs | API Box x Pin (NC38, NC46, NC50, 5-1/2 FH, etc.) | AISI 4145H Mod + Hardbanding / Sleeve | API Spec 7-1 | Non-Abrasive Casing-Friendly Hardbanding; Extend Top Drive Life |
Anti-Galling & Fatigue Resistance: Every rotary shouldered connection undergoes CNC precision threading, cold-working of thread roots, and manganese/zinc phosphating to prevent thread galling during high-torque rig-floor makeup.
-40°C Arctic & Sour Service Ready: Heat-treated to achieve Charpy V-Notch impact toughness ≥42J at -40°C for winter operations in Central Asia and North America, with NACE MR0175 / ISO 15156 sour-service compliance available for H₂S fields in the Middle East.
100% Quality Traceability & NDT: Every sub and lifting cap ships with full EN 10204 3.1 Material Test Reports (MTRs), 100% Ultrasonic (UT) and Magnetic Particle (MT) inspection certificates, API thread gauge verification, and 1.5x proof load test certificates for lifting tools.
Fast-Track 35–45 Day Delivery: Maintained bar-stock inventories of AISI 4145H Mod and non-magnetic alloys allow custom crossover, lifting, circulating, and wear subs to manufacture and dispatch within 35 to 45 days.
Proven Export Track Record: Regularly supplied to major drilling contractors, rig builders, and national oil companies across Central Asia (Kazakhstan, Uzbekistan, Turkmenistan), the Middle East (UAE, Saudi Arabia, Iraq, Oman), and North America.
Export-Grade Protection: Fitted with heavy-duty pressed-steel or cast-steel thread protectors, internal/external VCI corrosion inhibitors, and fumigated export wooden crates for secure international ocean and overland transport.
Answer: Yes. All rotary shouldered connections (NC, IF, REG, FH, H90) are manufactured and gauged strictly to API Spec 7-1, while tubing and casing crossover/circulating connections conform to API Spec 5CT (EUE, NUE, BTC, LTC, STC) as well as premium thread profiles upon request.
Answer: Our Lifting Subs feature precision-machined 18° tapered or 90° square elevator shoulders with full-radius transitions to prevent stress concentrations
Answer: Yes. For sour gas fields in the Middle East, we supply subs heat-treated to controlled hardness (max 22 HRC) in compliance with NACE MR0175 / ISO 15156. For sub-zero operations in Central Asia and North America, all alloy steel forgings are Charpy V-Notch impact tested at -40°C to prevent brittle fracture.
Answer: We offer Wear Subs fitted with casing-friendly tungsten carbide hardbanding (such as ARNCO 100XT or 300XT) to protect top-drive saver subs and tool joints, as well as non-rotating composite or steel sleeve stabilizers to prevent casing wear in high-dogleg directional wells
Answer: We guarantee a fast-track 35–45 day delivery timeline for standard and custom-machined subs